chain.c32 is a COM32 module for Syslinux. It can chainload MBRs, partition boot sectors, Windows bootloaders (ntldr, setupldr.bin and bootmgr), MS-DOS and PC-DOS io.sys, Freedos kernel.sys, isolinux.bin (only from ISOLINUX), grldr of grub4dos, or a bootsector saved to a file. It can also swap BIOS drive numbers, or hide partitions (via partition's ID).
All options as available in chain.c32 of Syslinux 3.85 (with some updates introduced in later versions):
chain.c32 hd<disk#> [<partition>] [options] chain.c32 fd<disk#> [options] chain.c32 mbr:<id> [<partition>] [options] chain.c32 boot [<partition>] [options] chain.c32 fs [options] chain.c32 label=<label> [options] chain.c32 guid=<label> [options]
| Load file, instead of boot sector
| Load another version of ISOLINUX
| Load Windows' NTLDR, SETUPLDR.BIN or BOOTMGR, or GRLDR
| Load GRUB4DOS' grldr
| Load Recovery Console of Windows NT/2K/XP
| Load FreeDOS kernel.sys
| Load PC-DOS ibmbio.com
| Load MS-DOS (2.xx to 6.xx) io.sys
| Load MS-DOS 7+ io.sys
| Load DRMK dellbio.bin
| Load ReactOS freeldr.sys
| Load grub legacy stage2
| Swap drive numbers, if boot drive is not fd0/hd0
|Hide primary partitions, except selected partition|
See doc/chain for more options.
Numbering of Drives and Partitions
Hard drive numbering starts at 0:
- hd0 : first hard drive (as seen by the BIOS)
- hd1 : second hard drive
- hd2 : third hard drive
Floppy drive numbering starts at 0:
- fd0 : first floppy drive
- fd1 : second floppy drive
The drive from which Syslinux is booted can be referred to with the parameter:
The drive and partition from which Syslinux is booted can be referred to with the parameter:
Find partition by uuid or label in all GPT partitions on all available drives:
Note that label and guid work only on GPT partition tables; it is not filesystem but partition label and guid.
The physical devices are counted starting at zero. The partitions are counted starting at one.
In a GPT scheme, there are only "primary" partitions. Usually up to a maximum of 128 primary partitions can be created in one GPT device (the specification allows for more; it requires appropriate conditions).
In a "DOS" (aka. "traditional" or "legacy" or "MBR") partition table scheme, a maximum of 4 "primary" partitions can be created, or alternatively up to 3 "primary" partitions and one "extended" partition, the latter containing "logical" partitions.
Please note that for devices with a traditional MBR ("DOS") partition table scheme, "chain.c32" counts the "logical" partitions starting from "five", even if not all "primary" slots are in used.
GPT partitions are simply counted in order, starting at one.
Partition numbers (short):
- 0 : MBR (default.)
- 1-4 : primary partitions
- 5 and higher : logical partitions
Partition numbers (long):
- 0 : MBR (default)
- 1 : first primary partition
- 2 : second primary partition
- 3 : third primary partition
- 4 : fourth primary partition
- 5 : first logical partition
- 6 : second logical partition
- 7 : third logical partition
- 8 : fourth logical partition
- 9 : fifth logical partition
- 10 : sixth logical partition
- 11 : seventh logical partition
- 12 : eighth logical partition
| First disk
as seen by BIOS
UI menu.c32 LABEL boot_hd0 MENU LABEL Boot from first hard drive COM32 chain.c32 APPEND hd0 LABEL boot_hd1 MENU LABEL Boot from second hard drive COM32 chain.c32 APPEND hd1 LABEL boot_fd0 MENU LABEL Boot from first floppy drive COM32 chain.c32 APPEND fd0 LABEL boot_syslinux_drive MENU LABEL Boot the drive from which Syslinux is booted (hard drive or floppy drive) COM32 chain.c32 APPEND boot LABEL boot_syslinux_filesystem MENU LABEL Boot the filesystem from which Syslinux is booted (partition in hard drive or floppy drive) COM32 chain.c32 APPEND fs LABEL boot_hd2_2 MENU LABEL Boot second primary partition from third hard drive COM32 chain.c32 APPEND hd2 2 LABEL boot_hd1_5 MENU LABEL Boot first logical partition from second hard drive COM32 chain.c32 APPEND hd1 5 LABEL boot_hd3_0 MENU LABEL Boot MBR of fourth hard drive (same as "APPEND hd3") COM32 chain.c32 APPEND hd3 0 LABEL boot_part_win7fs MENU LABEL Boot ntldr from GPT partition labelled "win7fs" COM32 chain.c32 APPEND label=win7fs ntldr=/bootmgr
The "mbr:" syntax means search all the hard disks until one with a specific MBR serial number (bytes 440-443) is found.
You can get the MBR serial number, by running the following command (change /dev/sda to the correct device):
$ hexdump -s 440 -n 4 -e '"0x%08x\n"' /dev/sda 0x0ec8694c
Or by running:
$ fdisk -l /dev/sda ... Disk identifier: 0x0ec8694c
LABEL mbr_serial COM32 chain.c32 APPEND mbr:0x0ec8694c
The following are some popular options available for chain.c32. See doc/chain for more options.
- Load the file <loader> from the SYSLINUX filesystem instead of loading the boot sector.
- Load another version/build of the ISOLINUX bootloader and patch the loader with appropriate parameters in memory. This avoids the need for the -eltorito-alt-boot parameter of mkisofs, when more than one ISOLINUX per CD/DVD is needed.
- Equivalent to file=<loader> seg=0x2000 setbpb nohand
- Used with WinNT's loaders
- Load GRUB4DOS grldr, performing additional corrections on the file in memory.
- Equivalent to ntldr=<loader> & "cmdcons\0"
- Used with Recovery Console of Windows NT/2K/XP, written to the system name field in the bootsector.
- Equivalent to file=<loader> seg=0x60 sect=0x1FE0 setbpb nohand
- Used with FreeDOS' kernel.sys
- Equivalent to file=<loader> seg=0x70 sect=0x8000 setbpb nohand
- Used with PC-DOS' ibmbio.com
- Equivalent to file=<loader> seg=0x70 sect=0x8000 setbpb nohand
- Used with MS-DOS (v.2.xx to 6.xx)' io.sys
- Equivalent to file=<loader> seg=0x70:0:0x200 sect=0x8000 setbpb nohand
- Used with MS-DOS v.7+' io.sys
- Equivalent to file=<loader> seg=0x70 sect=0x2000 setbpb nohand
- Used with DRMK' dellbio.bin
- [6.04+] Equivalent to file=<loader> seg=0x0F80 setbpb nohand
- Used with ReactOS' freeldr.sys. Add 'save' option so as to store corrected BPB values.
- [4.02+] Equivalent to file=<loader> seg=0x800::0x200 nohand nosect grub
- Used with grub legacy's stage2, performing additional corrections on the file in memory. Optionally, an alternative config file can be specified via the 'grubcfg' option.
- If the drive is not fd0/hd0, install a BIOS stub which swaps the drive numbers.
- Change type of primary partitions with IDs 01, 04, 06, 07, 0b, 0c, or 0e, to 1x, except for the selected partition, which is converted the other way.
In UEFI, the boot process is slightly different than in BIOS. For booting the system, UEFI does not use traditional boot records, but rather efi-compatible files/images.
When using UEFI mode, there are no such things as chaining to a traditional MBR/VBR or loading a file that is not efi-compatible.
As of version 6.03, chain.c32 cannot chainload efi-compatible files, so there is no practical use of it in UEFI mode.
When using CSM mode (aka "legacy" or "BIOS" mode) in a UEFI system, chain.c32 should work as in a traditional BIOS-based hardware, provided that the adequate binary is being used (from the "BIOS" firmware architecture, not from "EFI") and that the firmware correctly and fully supports CSM mode.