- 1 Ugg Boots Would Be the preferred model among various individuals
- 2 Options
- 3 Creating a Bootable Disk
- 4 How do I Configure SYSLINUX?
- 4.1 INCLUDE filename
- 4.2 LABEL command
- 4.2.1 KERNEL file
- 4.2.2 APPEND options...
- 4.2.3 APPEND -
- 4.2.4 IPAPPEND flag_val [PXELINUX only]
- 4.2.5 LOCALBOOT type [ISOLINUX, PXELINUX]
- 4.2.6 INITRD initrd_file
- 4.3 DEFAULT command
- 4.4 UI module options...
- 4.5 PROMPT flag_val
- 4.6 NOESCAPE flag_val
- 4.7 NOCOMPLETE flag_val
- 4.8 IMPLICIT flag_val
- 4.9 ALLOWOPTIONS flag_val
- 4.10 TIMEOUT timeout
- 4.11 TOTALTIMEOUT timeout
- 4.12 ONTIMEOUT kernel options...
- 4.13 ONERROR kernel options...
- 4.14 SERIAL port [[baudrate] flowcontrol]
- 4.15 CONSOLE flag_val
- 4.16 FONT filename
- 4.17 KBDMAP keymap
- 4.18 SAY message
- 4.19 DISPLAY filename
- 4.20 F[1-12] filename
- 5 Is There A Way To Define Constants Or Variables?
- 6 Can SYSLINUX Handle Large Kernels?
- 7 What is the DISPLAY File Format?
Ugg Boots Would Be the preferred model among various individuals
If you might be pondering to purchase a pair of UGG Cardy traditional Boots, one can find couple of points that you just should really think of in buy to produce a beneficial purchase. Generally the UGG boots are recognized to operate http://www.acheterrunescape2gold.com/runescape-15-x-millions-de-libre-echange-dor.html about 1 sizing huge and they're only obtainable in complete size. Before you acquire a pair UGG of Cardy traditional Boots acquire a take a appear at the next guidelines so you'll make the proper choice:
1. for any complete size, such as a 6, it can be advised to purchase 1 complete sizing straight down so in this particular instance it could be considered a 5. Even in the celebration you prefer to put on dense socks together with your UGG Cardy traditional Boots, i'd nevertheless http://www.acheterrunescape2gold.com/runescape-35-x-millions-de-libre-echange-dor.html recommend to purchase 1 complete sizing down.
2. considering that the UGG boots are only obtainable in complete size, it can be advised to purchase one & 1/2 dimensions straight down out of your actual size. such as in the celebration you put on a sizing 6½ a sizing five should really nevertheless be the very best sizing for you.
These easy guidelines will assist to produce the http://www.acheterrunescape2gold.com/runescape-40-x-millions-de-libre-echange-dor.html proper selection just before you acquire a pair of UGG Cardy traditional Boots. do not neglect that throughout the winter months time these boots are especially popular, so they are not uncomplicated to discover inside sizing you might be seeking for, specifically in normal dimensions including seven and 8.
These boots are so common for his or her versatile model and amazing quality. What tends to make these boots so unique from other boots inside Ugg selection could http://www.acheterrunescape2gold.com/runescape-10-x-millions-de-libre-echange-dor.html be the three huge wood buttons that allow you to definitely truly amazing some many appears and designs with them.
If you might be pondering to purchase a pair of those wonderful http://www.acheterrunescape2gold.com/runescape-20-x-millions-de-libre-echange-dor.html" boots, i'd recommend you to definitely begin looking for the ideal pair just before they will almost certainly be offered out!
These are the options common to all versions of the SYSLINUX installer:
-s Safe, slow, stupid: uses simpler code that boots better. This version may work on some very buggy BIOSes on which SYSLINUX would otherwise fail. If you find a machine on which the -s option is required to make it boot reliably, please send as much info about your machine as you can, and include the failure mode. -f Force installing. -r Raid mode: If boot fails, tell the BIOS to boot the next device in the boot sequence (usually the next hard disk), instead of stopping with an error message. This is useful for RAID-1 booting.
These are only available in the Windows version:
-m MBR: install a bootable MBR sector to the beginning of the drive. -a Active: marks the partition used active (=bootable)
This is can only be used in the linux version:
-o Specifies the byte offset of the filesystem image in the file. It has to be used with a disk image file.
Creating a Bootable Disk
Installing SYSLINUX will alter the boot sector on the disk, and copy a file named LDLINUX.SYS into the root directory.
At boot time, by default, the kernel will be loaded from the image named LINUX on the boot disk. This default can be changed, see the section on the SYSLINUX config file.
If the Shift or Alt keys are held down during boot, or the Caps or Scroll locks are set, SYSLINUX will display a LILO-style "boot:" prompt. The user can then type a kernel file name followed by any kernel parameters. The SYSLINUX loader does not need to know about the kernel file in advance. All that is required is a file in the root directory of the disk.
In order to create a bootable disk using SYSLINUX, prepare a normal MS-DOS formatted disk. Copy one or more Linux kernel files to it, then execute:
syslinux.exe [-sfmar][-d directory] <drive>: [bootsecfile]
|Floppy: (a: in this example)|
|HardDrive/FlashDrive/etc: (z: in this example)|
syslinux.exe -m -a -d /boot/syslinux z:
|* In the above example syslinux.cfg would be expected to be in z:\boot\syslinux|
|* NOTE: Under NT/2K you may get a dialog box about not getting exclusive access and with Abort/Retry/Ignore buttons; selecting "Ignore" will make the command execute sucessfully.|
syslinux.com [-sfmar][-d directory] <drive>: [bootsecfile]
syslinux [-sfr][-d directory][-o offset] <DeviceOrImage>
The -o option (if specified) is used with a disk image file and specifies the byte offset of the filesystem image in the file.
How do I Configure SYSLINUX?
All the configurable defaults in SYSLINUX can be changed by creating a file called syslinux.cfg.
SYSLINUX searches for the SYSLINUX.CFG file in the following order:
/boot/syslinux/syslinux.cfg /syslinux/syslinux.cfg /syslinux.cfg
All filenames inside the config file are assumed to be relative to the directory SYSLINUX.CFG is in, unless preceded with a slash or backslash.
syslinux.cfg is a text file in either UNIX or DOS format, containing one or more of the keywords listed below. Keywords are case insensitive. Upper case is used here to indicate a word should be typed verbatim.
Here is a simple example syslinux.cfg file, with one entry to boot a Linux kernel:
DEFAULT linux LABEL linux SAY Now booting the kernel from SYSLINUX... KERNEL vmlinuz.img APPEND ro root=/dev/sda1 initrd=initrd.img
Note that LILO uses the syntax:
image = mykernel label = mylabel append = "myoptions"
... whereas SYSLINUX uses the syntax:
LABEL mylabel KERNEL mykernel APPEND myoptions
All options here apply to PXELINUX, ISOLINUX and EXTLINUX as well as SYSLINUX unless otherwise noted.
Inserts the contents of another file at this point in the configuration file. Currently, files can be nested up to 16 levels deep, but it is not guaranteed that more than 8 levels will be supported in future versions.
A human-readable string that describes a kernel and options. The default LABEL is "linux", but you can change this with the "DEFAULT" keyword.
Labels are mangled as if they were filenames, and must be unique after mangling. For example, the labels "v2.1.30" and "v2.1.31" will not be distinguishable under SYSLINUX, since both mangle to the same DOS filename.
Selects the file SYSLINUX will boot. The "kernel" doesn't have to be a Linux kernel, it can be a boot sector or a COMBOOT file.
Chain loading requires the boot sector of the foreign operating system to be stored in a file in the root directory of the filesystem. Because neither Linux kernel boot sector images, nor COMBOOT files have reliable magic numbers, Syslinux will look at the file extension. The following extensions are recognized (case insensitive):
none or other Linux kernel image .0 PXE bootstrap program (NBP) [PXELINUX only] .bin "CD boot sector" [ISOLINUX only] .bs Boot sector [SYSLINUX only] .bss Boot sector, DOS superblock will be patched in [SYSLINUX only] .c32 COM32 image (32-bit COMBOOT) .cbt COMBOOT image (not runnable from DOS) .com COMBOOT image (runnable from DOS) .img Disk image [ISOLINUX only]
Using one of these keywords instead of KERNEL forces the filetype, regardless of the filename:
You can use this, instead of using KERNEL file to boot a linux kernel image.
Bootstrap program (.bs, .bin)
BSS image (.bss)
PXE Network Bootstrap Program (.0)
Floppy disk image (.img)
COMBOOT program (.com, .cbt)
COM32 program (.c32)
CONFIG will restart the boot loader using a different configuration file.
Load new config file:
LABEL new_config CONFIG </path/to/cfg/file>/<configfile.cfg>
Set Syslinux' home dir to </path/to/cfg/file> and load new config file:
LABEL new_config2 CONFIG </path/to/cfg/file>/<configfile.cfg> </path/to/cfg/file>
Adds one or more options to the kernel command line. These are added to both automatic and manual boots. The options are added at the very beginning of the kernel command line, usually permitting explicitly entered kernel options to override them. This is the equivalent of the LILO "append" option.
The entire APPEND statement must be on a single line. A feature to break up a long line into multiple lines will be added eventually.
If you enter multiple APPEND statements in a single menu entry, only the last one will be used.
Append nothing. APPEND with a single hyphen as argument in a LABEL section can be used to override a global APPEND.
IPAPPEND flag_val [PXELINUX only]
The IPAPPEND option is available only on PXELINUX. The flag_val is an OR of the following options:
1: indicates that an option of the following format should be generated and added to the kernel command line:
... based on the input from the DHCP/BOOTP or PXE boot server.
The use of this option is not recommended. If you have to use it, it is probably an indication that your network configuration is broken. Using just ip=dhcp on the kernel command line is a preferrable option, or, better yet, run dhcpcd/dhclient, from an initrd if necessary.
2: indicates that an option of the following format should be generated and added to the kernel command line:
... in dash-separated hexadecimal with leading hardware type (same as for the configuration file; see PXELINUX documentation).
This allows an initrd program to determine which interface the system booted from.
LABEL label KERNEL image APPEND options... IPAPPEND flag_val [PXELINUX only]
... indicates that if "label" is entered as the kernel to boot, SYSLINUX should instead boot "image", and the specified APPEND and IPAPPEND options should be used instead of the ones specified in the global section of the file (before the first LABEL command.) The default for "image" is the same as "label", and if no APPEND is given the default is to use the global entry (if any). Up to 128 LABEL entries are permitted. (for ISOLINUX, 64 LABEL entries.)
LOCALBOOT type [ISOLINUX, PXELINUX]
With PXELINUX, specifying "LOCALBOOT 0" instead of a "KERNEL" option means invoking this particular label will cause a local disk boot instead of booting a kernel.
The argument 0 means perform a normal boot. The argument 4 will perform a local boot with the Universal Network Driver Interface (UNDI) driver still resident in memory. Finally, the argument 5 will perform a local boot with the entire PXE stack, including the UNDI driver, still resident in memory. All other values are undefined. If you don't know what the UNDI or PXE stacks are, don't worry, you don't want them, just specify 0.
With ISOLINUX, the "type" specifies the local drive number to boot from; 0x00 is the primary floppy drive and 0x80 is the primary hard drive. The special value -1 causes ISOLINUX to report failure to the BIOS, which, on recent BIOSes, should mean that the next device in the boot sequence should be activated.
Starting with version 3.71, an initrd can be specified in a separate statement (INITRD) instead of as part of the APPEND statement. This functionally appends "initrd=initrd_file" to the kernel command line.
It supports multiple filenames separated by commas. This is mostly useful for initramfs, which can be composed of multiple separate cpio or cpio.gz archives. Note: all files except the last one are zero-padded to a 4K page boundary. This should not affect initramfs.
Sets the default command line. If SYSLINUX boots automatically, it will act as if the entries after DEFAULT had been typed in at the "boot:" prompt, except that the option "auto" is automatically added, indicating an automatic boot.
If no configuration file is present, or no DEFAULT entry is present in the config file, the default kernel name is "linux", with no options.
UI module options...
Selects a specific user interface module (typically menu.c32 or vesamenu.c32). The command-line interface treats this as a directive that overrides the DEFAULT and PROMPT directives.
If flag_val is 0, display the boot: prompt only if the Shift or Alt key is pressed, or Caps Lock or Scroll lock is set (this is the default). If flag_val is 1, always display the boot: prompt.
If flag_val is set to 1, ignore the Shift/Alt/Caps Lock/Scroll Lock escapes. Use this (together with PROMPT 0) to force the default boot selection.
If flag_val is set to 1, the Tab key does not display labels at the boot: prompt.
If flag_val is 0, do not load a kernel image unless it has been explicitly named in a LABEL statement. The default is 1.
If flag_val is 0, the user is not allowed to specify any arguments on the kernel command line. The only options recognized are those specified in an APPEND statement. The default is 1.
Indicates how long to pause at the boot: prompt until booting automatically, in units of 1/10 s. The timeout is cancelled when any key is pressed, the assumption being the user will complete the command line. A timeout of zero will disable the timeout completely. The default is 0.
NOTE: The maximum possible timeout value is 35996. (Just under an hour.)
Indicates how long to wait until booting automatically, in units of 1/10 s. This timeout is *not* cancelled by user input, and can thus be used to deal with serial port glitches or "the user walked away" type situations. A timeout of zero will disable the timeout completely. The default is 0.
Both TIMEOUT and TOTALTIMEOUT can be used together, for example:
# Wait 5 seconds unless the user types something, but # always boot after 15 minutes. TIMEOUT 50 TOTALTIMEOUT 9000
ONTIMEOUT kernel options...
Sets the command line invoked on a timeout. Normally this is the same thing invoked by DEFAULT. If this is specified, then DEFAULT is used only if the user presses <Enter> to boot.
ONERROR kernel options...
If a kernel image is not found (either it doesn't exist, or IMPLICIT is set), run the specified command. The faulty command line is appended to the specified options, so if the ONERROR directive reads:
ONERROR xyzzy plugh
... and the command line entered by the user is:
foo bar baz
... SYSLINUX will execute the following as if it were entered by the user:
xyzzy plugh foo bar baz
SERIAL port [[baudrate] flowcontrol]
Enables a serial port to act as the console. "port" is a number (0 = /dev/ttyS0 = COM1, etc.) or an I/O port address (e.g. 0x3F8). If "baudrate" is omitted, the baud rate defaults to 9600 bps. The serial parameters are hardcoded to 8 bits, no parity and 1 stop bit.
"flowcontrol" is a combination of the following bits:
0x001 - Assert DTR 0x002 - Assert RTS 0x010 - Wait for CTS assertion 0x020 - Wait for DSR assertion 0x040 - Wait for RI assertion 0x080 - Wait for DCD assertion 0x100 - Ignore input unless CTS asserted 0x200 - Ignore input unless DSR asserted 0x400 - Ignore input unless RI asserted 0x800 - Ignore input unless DCD asserted
All other bits are reserved.
Typical values are:
0 - No flow control (default) 0x303 - Null modem cable detect 0x013 - RTS/CTS flow control 0x813 - RTS/CTS flow control, modem input 0x023 - DTR/DSR flow control 0x083 - DTR/DCD flow control
For the SERIAL directive to work properly, it must be the first directive in the configuration file.
NOTE: "port" values from 0 to 3 mean the first four serial ports detected by the BIOS. They may or may not correspond to the legacy port values 0x3F8, 0x2F8, 0x3E8, 0x2E8.
If flag_val is 0, disable output to the normal video console. If flag_val is 1, enable output to the video console (this is the default.) Some BIOSes try to forward this to the serial console which can make a total mess of things, so this option lets you disable the video console on these systems.
Load a font in .psf format before displaying any output (except the copyright line, which is output as ldlinux.sys itself is loaded.) SYSLINUX only loads the font onto the video card. If the .psf file contains a Unicode table, it is ignored. This only works on EGA and VGA cards. Hopefully, it does nothing on others.
Install a simple keyboard map. The keyboard remapper used is very simplistic (it simply remaps the keycodes received from the BIOS, which means that only the key combinations relevant in the default layout -- usually U.S. English -- can be mapped) but should at least help people with QWERTZ or AZERTY keyboard layouts and the locations of = and , (two special characters used heavily on the Linux kernel command line.)
The included program keytab-lilo.pl from the LILO distribution can be used to create such keymaps. The file keytab-lilo.doc contains the documentation for this program.
Syslinux also ships a comboot module named kbdmap.c32 which allows changing the keyboard mapping on the fly, making it possible to add a keyboard-selection menu and/or keyboard-selection labels from within the syslinux config file.
Prints the message on the screen.
Displays the indicated file on the screen at boot time (before the boot: prompt, if displayed). Please see the section below on DISPLAY files.
NOTE: If the file is missing, this option is ignored.
F1 filename F2 filename ...etc... F9 filename F10 filename F11 filename F12 filename
Displays the indicated file on the screen when a function key is pressed at the boot: prompt. This can be used to implement pre-boot online help (presumably for the kernel command line options).
Please see the section below on DISPLAY files.
When using the serial console, press <Ctrl-F><digit> to get to the help screens:
<Ctrl-F><1> to get the F1 screen <Ctrl-F><2> to get the F2 screen ...etc... <Ctrl-F><9> to get the F9 screen <Ctrl-F><A> (or <Ctrl-F><0>) to get the F10 screen <Ctrl-F><B> to get the F11 screen <Ctrl-F><B> to get the F11 screen <Ctrl-F><C> to get the F12 screen
In the configuration file, blank lines and comment lines beginning with a hash mark (#) are ignored.
Note that the configuration file is not completely decoded. Syntax different from the one described above may still work correctly in this version of SYSLINUX, but may break in a future one.
Is There A Way To Define Constants Or Variables?
At present, there is no way to define constants or variables in the configuration file. That feature will be added eventually.
Can SYSLINUX Handle Large Kernels?
SYSLINUX supports large kernels (bzImage format), eliminating the 500K size limit of the zImage kernel format. bzImage format kernels are detected automatically and handled transparently to the user.
SYSLINUX also supports a boot-time-loaded ramdisk (initrd). An initrd is loaded from a DOS file if the option "initrd=filename" (where filename is the filename of the initrd image; the file must be located in the root directory on the boot floppy) is present on the processed command line (after APPEND's have been added, etc.). If several initrd options are present, the last one has precedence; this permits user-entered options to override a config file APPEND. Specifying "initrd=" without a filename inhibits initrd loading. The file specified by the initrd= option will typically be a gzipped filesystem image.
APPEND ro root=/dev/hda1 initrd=/boot/initrd.img
NOTE: One of the main advantages of SYSLINUX is that it makes it very easy to support users with new or unexpected configurations, especially in a distribution setting. If initrd is used to extensively modularize the distribution kernel, it is strongly recommended that a simple way of adding drivers to the boot floppy be provided. The suggested manner is to let the initrd system mount the boot floppy and look for additional drivers in a predetermined location.
To bzImage and recent zImage kernels, SYSLINUX 1.30 and higher will identify using the ID byte 0x31. PXELINUX identifies using the ID byte 0x32, ISOLINUX 0x33, and EXTLINUX 0x34. The ID range 0x35-0x3f is reserved for future versions of derivatives of SYSLINUX.
What is the DISPLAY File Format?
DISPLAY and function-key help files are text files in either DOS or UNIX format (with or without <CR>). In addition, the following special codes are interpreted:
Clear the screen, home the cursor:
<FF> <FF> = <Ctrl-L> = ASCII 12
Note that the screen is filled with the current display color.
Set the display colors to the specified background and foreground colors:
<SI><bg><fg> <SI> = <Ctrl-O> = ASCII 15
where <bg> and <fg> are hex digits, corresponding to the standard PC display attributes:
0 = black 8 = dark grey 1 = dark blue 9 = bright blue 2 = dark green a = bright green 3 = dark cyan b = bright cyan 4 = dark red c = bright red 5 = dark purple d = bright purple 6 = brown e = yellow 7 = light grey f = white
Picking a bright color (8-f) for the background results in the corresponding dark color (0-7), with the foreground flashing.
Colors are not visible over the serial console.
Example: color.txt file:
^O9eBlinking Yellow on Blue Background
# xxd color.txt 0000000: 0f39 6542 6c69 6e6b 696e 6720 5965 6c6c .9eBlinking Yell 0000010: 6f77 206f 6e20 426c 7565 2042 6163 6b67 ow on Blue Backg 0000020: 726f 756e 640a round.
Display graphic from filename:
<CAN>filename<newline> <CAN> = <Ctrl-X> = ASCII 24
If a VGA display is present, enter graphics mode and display the graphic included in the specified file. The file format is an ad hoc format called LSS16; the included Perl program "ppmtolss16" can be used to produce these images. This Perl program also includes the file format specification.
The image is displayed in 640x480 16-color mode. Once in graphics mode, the display attributes (set by <SI> code sequences) work slightly differently: the background color is ignored, and the foreground colors are the 16 colors specified in the image file. For that reason, ppmtolss16 allows you to specify that certain colors should be assigned to specific color indices.
Color indices 0 and 7, in particular, should be chosen with care: 0 is the background color, and 7 is the color used for the text printed by SYSLINUX itself.
Return to text mode:
<EM> <EM> = <Ctrl-Y> = ASCII 25
If we are currently in graphics mode, return to text mode. Select to which modes to print a certain part of the message:
<DLE>..<ETB> <Ctrl-P>..<Ctrl-W> = ASCII 16-23
These codes can be used to select which modes to print a certain part of the message file in. Each of these control characters select a specific set of modes (text screen, graphics screen, serial port) for which the output is actually displayed:
Character Text Graph Serial ------------------------------------------------------ <DLE> = <Ctrl-P> = ASCII 16 No No No <DC1> = <Ctrl-Q> = ASCII 17 Yes No No <DC2> = <Ctrl-R> = ASCII 18 No Yes No <DC3> = <Ctrl-S> = ASCII 19 Yes Yes No <DC4> = <Ctrl-T> = ASCII 20 No No Yes <NAK> = <Ctrl-U> = ASCII 21 Yes No Yes <SYN> = <Ctrl-V> = ASCII 22 No Yes Yes <ETB> = <Ctrl-W> = ASCII 23 Yes Yes Yes
<DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>
will actually print out which mode the console is in!
End of file:
<SUB> <SUB> = <Ctrl-Z> = ASCII 26
End of file (DOS convention).
<BEL> <BEL> = <Ctrl-G> = ASCII 7
Beep the speaker.
Write DISPLAY file with IsoLinux Mate
IsoLinux Mate (ILM) is a Windows 32-bit executable that makes it easier to write a DISPLAY file.
With ILM you can insert color commands, insert ASCII graphics with "not a real on-screen keyboard", preview your work, ...