Difference between revisions of "Sysdump.c32"

From Syslinux Wiki
Jump to: navigation, search
m (TFTP)
(XMODEM: Actually YMODEM; details.)
Line 18: Line 18:
 
If no tftp_server is specified, the one where PXELINUX was loaded from is used.
 
If no tftp_server is specified, the one where PXELINUX was loaded from is used.
  
=== XMODEM ===
+
=== YMODEM ===
 +
YMODEM transfer requires a hardware-based serial port on the system running sysdump.c32 and an appropriate cable (often a NULL MODEM cable attached to another PC).
 +
 
 +
'''Syntax:'''  sysdump.c32 ymodem filename [port [speed]]
 +
 
 +
The the port defaults to the equivalent of DOS's COM1 and the speed defaults to 115200 bps.
  
 
== Contents ==
 
== Contents ==
 
The output of '''sysdump.c32''' is a .cpio.gz file.
 
The output of '''sysdump.c32''' is a .cpio.gz file.

Revision as of 17:29, 19 April 2011


About

sysdump.c32 is a COM32 diagnostic utility module that will gather certain system-specific data that can be used to help diagnose hardware-specific issues.

WARNING

The output of sysdump.c32 contains certain system-specific data and should not be shared publicly.

Use

At this time (2011-04-19), sysdump.c32 has two output mechanisms, xmodem and tftp.

TFTP

TFTP upload is limited to PXELINUX due to the lack of networking in other variants.

Syntax: sysdump.c32 tftp filename [tftp_server]

If no tftp_server is specified, the one where PXELINUX was loaded from is used.

YMODEM

YMODEM transfer requires a hardware-based serial port on the system running sysdump.c32 and an appropriate cable (often a NULL MODEM cable attached to another PC).

Syntax: sysdump.c32 ymodem filename [port [speed]]

The the port defaults to the equivalent of DOS's COM1 and the speed defaults to 115200 bps.

Contents

The output of sysdump.c32 is a .cpio.gz file.